Air filter installation and use

1. When installing, whether the air filter and the engine intake pipe are connected by flanges, rubber pipes or directly, they must be tight and reliable to prevent air leakage. Rubber gaskets must be installed on both ends of the filter element; fixed air filter The wing nut of the outer cover of the filter should not be tightened too tightly to avoid crushing the paper filter element.

2. During maintenance, the paper filter element must not be cleaned in oil, otherwise the paper filter element will become invalid and easily cause a speed accident. During maintenance, you can only use vibration method, soft brush removal method (to brush along the wrinkles) or compressed air blowback method to remove dust and dirt attached to the surface of the paper filter element. For the coarse filter part, the dust in the dust collection part, blades and cyclone tube should be removed in time. Even if it can be carefully maintained every time, the paper filter element cannot fully restore its original performance, and its air intake resistance will increase. Therefore, generally when the paper filter element needs to be maintained for the fourth time, it should be replaced with a new filter element. If the paper filter element is broken, perforated, or the filter paper and the end cap are degummed, it should be replaced immediately.

3. When in use, it is necessary to prevent the paper core air filter from being wetted by rain, because once the paper core absorbs a large amount of water, it will greatly increase the air intake resistance and shorten the mission. In addition, the paper core air filter should not be in contact with oil and fire.

4. Some vehicle engines are equipped with cyclone air filters. The plastic cover at the end of the paper filter element is a diversion cover. The blades on the cover make the air rotate. 80% of the dust is separated under the action of centrifugal force and collected in the dust collector. The dust reaching the paper filter element is 20% of the dust inhaled, and the total filtration efficiency is about 99.7%. Therefore, when maintaining the cyclone air filter, be careful not to miss the plastic deflector on the filter element.

We can manufacture filters according to your requirements. Please tell me the photo and size. Welcome OEM and ODM!

Welcome OEM! Please inform us of the following information.

1, photo

2, ID, OD, height

3, filtration accuracy

4, filter media

5, the form of end cover.

Our advantages

1. we are factory and more than 11 years of export experience, to ensure good quality and low price.

2. products are sold to 68 countries in the world.

3. custom sample processing, engineer one to one service

4. short delivery time, free samples, provide OEM service.

5.24 hours customer service online service

QA

1. high quality raw materials and advanced technology.

2. our products are strictly produced according to the requirements.

3. high efficiency, high precision, ensure equipment safety.


Hits:    【Print